LED lighting VS Traditional lighting

According to different light sources, high bay lights can be divided into conventional high bay lights (like sodium lamp high bay and mercury lamp high bay) and LED high bay lights. Compared with conventional lighting, LED high bay lighting fixtures have many advantages.

1. 1. LED high bay lights have higher RA. RA>70

1. LED high bay lights have higher light efficiency and are more energy-saving. For example, one 150w high bay LED lighting can be a direct replacement of 400w conventional high bay lighting.
2. Conventional light sources all have features and responses of high fixture temperature. The temperature can reach 200-300℃. However LED itself is a cold light source, so the fixture has low temperature, and it’s safer. It belongs to cold drive.
3. LED high bay lights are under continuous innovation. The newest-style fin radiator make LED high bay lights have more reasonable radiator design. This decreases a lot of weight of LED high bay lights. The weight of 80W LED high bay light drops to below 4KG, and can perfectly solve the heat dissipation problem of conventional 300W LED high bay lights.

According to lighting functions, LED highbay light can be divided into two kinds, general lighting fixtures and partial lighting fixtures.

General lighting fixtures

General lighting fixtures are usually installed uniformly on top or side walls of working places to lit up the whole places. High power and energy efficient warehouse lighting fixtures are necessarily required. The vast majority of led bay light fixtures belong to this type. General lighting fixtures have higher requirements for light distribution. They widely adopt direct lighting and semi-direct lighting, especially the latter. Part of the upward lights of semi-direct lighting illuminate the ceiling. This can increase ceiling brightness and create more comfortable and brighter environment.

Usually when we are designing energy saving warehouse lighting solutions, we are looking for LED light bay lighting fixtures, or LED barn lights.

Partial lighting fixtures

Partial lighting fixture is a kind of luminaire that aims to improve illuminance in a certain working area. Its function is to strengthen and supplement illumination on the base of general lighting. Their light distributions mostly don’t have strict regulations. Partial lighting luminaires are usually installed around working areas. Lighting sources, as used in facility design, should be safe and low voltage. LED warehouse lighting includes portable lighter, pendant lamp, work desk lamp, machine tool working lamp and so on. They are generally installed In some high and big warehouses or working areas. Besides highbay LED lights, sometimes we can also use industrial flood lights as partial lighting.

LED warehouse light usually means LED bay light. It can be LED high bay light and LED low bay light. They all belong to industrial led light. But industrial low bay led light fixtures are not often used now. Usually we need hard lighting for lighting warehouse. Like other LED industrial lights, LED high bay fixtures should also be energy-saving, low-carbon and environment-friendly.

Features of warehouse industrial lighting

1. Meet the requirements of working during nighttime

At night, some laboring is performed in indoor places. Even though in day time some of these areas might still need artificial lighting, which cannot be compared with natural lighting, in the nighttime the lux levels required should be much higher. Lack of illuminance level and visual features will increase error rate or decrease speed, even though adopting higher level illumination to guarantee better visual characteristics.

In terms of visual effects from illumination, lights should be laid out through reasonable lighting calculation according to the corresponding lighting standards and requirements of real working places in order to guarantee minimum lighting level and decrease working efficiency loss, due to insufficient illumination. In dim environment, a certain Color Rendering Index should be guaranteed to improve effective light effects.

2. Make people feel visually comfortable while meeting illumination requirements

The effects that warehouse ceiling and wall sides make to illumination is related to room area. Ceiling in small warehouse accounts for a small ratio and makes few effects to illumination while ceiling in large warehouse accounts for a larger proportion and makes a bigger impact and effect on illumination. Therefore, small warehouse should be equipped with high-reflectivity walls and low-reflectivity ceiling, vice versa for big warehouse to get moderate and uniform illumination through effective lights layout. Illumination requires brightness and clearness, no glaring and no double image.

3. Meeting energy-saving, low-carbon and environmentally-friendly requirements are equally important.

Take conventional sodium lamp for an example, conventional lamps have many disadvantages: low light efficiency, lack of beam reach during the illumination process, poor safety, high energy consumption, low CRI, high thermal efficiency and so on. These cannot save energy well and not eco-friendly. Therefore, best choice for factory and depot ceiling is LED warehouse lighting.

The post Energy Efficient LED Warehouse Lighting and Factory Lights appeared first on LEDStadium.

In these cases, warehouses owners need to consider several things concerning the warehouse lighting. Such as the layout, suitable industrial led light fixtures and industrial lighting ideas. It all depends on the characteristics you need to find in industrial lighting companies. Only spending as little as possible on the lighting, might lead you to spend more on the after-sales service afterwards, such as returns, damaged goods, etc. Therefore, it is important you buy LED High Bay Lighting from a good brand, which uses the best components, such as LED chips, drivers, heat sinks, internal wires, optical lens, and so on.

If the working staff of a factory don’t have suitable warehouse led lighting to perform their tasks, then you should consider replacing older fixtures for new ones. We are glad to introduce our company LedStadium, which has LED Lights bright enough to increase your lux averages. We are not only hazardous location lighting manufacturers, but also explosion proof led lighting manufacturers, based on ShenZhen, China. We have more than 15 years experience with high power led factory lighting. We are an innovative manufacturer and distributor of LED lights and solutions, famous for having an identity of its own.

Finding a proper and most efficient layout of high bay lighting is not an obvious thing, and requires considerably input from experienced lighting engineers. That is the only way that the lighting level can be improved, so that the factory owner or warehouse head feels satisfied with optic illumination quality and aiming of lighting. Poorly industrial high bay led lighting installations do not make any sense, since they only represent energy waste, reducing the luminance levels by throwing the lighting to the wrong places. If an incorrect beam angle is chosen for a LED High Bay Lighting, it is hard to keep a stable uniformity. In addition, maintenance costs should be kept lower and inexpensive, and as less time-consuming as possible.

Choosing the suitable led light fixtures for industrial is a key point. Some years ago, traditional light selection for a warehouse included HID lights, fluorescent bulbs and metal halide lighting fixtures. HIDs were caught attention back then because they had a reasonably good efficacy level, they could help to save some energy in the monthly bill. However, this source had very lower Color Rendering Index (CRI) of just 20. This kind of drawback made the workers hardly distinguish the labels of the products in the production line. Plus, they are far from ideal for hazardous location led lighting and warehouse lighting, since they generate a lot of heat.

Metal halide lighting fixtures cost more than HIDS, although they have higher CRI( CRI>60). They are a little bit better to make detailed work and improve safety in general. The drawback of the metal halide lighting fixtures is their short lifespan. Most of metal halide lighting fixtures can only endure 2500 working hours. It means that you need to change them every other 2 or 3 months.

Factory and depot owners need to consider the time and money for making the replacement of the Metal halide by LED High Bay Lighting, as something that will bring a lot of benefits in the long-run.

With the constant development of LED technology, explosion proof led light fixtures became more efficient than Metal halide and fluorescent lights. LED high bay light fixtures are bright, have nice Color Rendering Index, are directional, which make them perfect to easily lit a working area. And since the high bay led lighting prices are on a downward trend, explosion proof led lights will become one of the best choice for factory and special warehouse lighting. For example, the led 100w flood light can replace 300W metal halide with the same brightness.

Hope this article helps you to understand warehouse lighting. Finding the proper high bay led light fixtures to provide a good warehouse lighting should be the core of a company development. The best led light fixtures industrial system can improve work-habits, the well-being of employees and the overall work efficiency. High quality LED light fixtures also reduce maintenance fees and the cost of luminaries.

The post Industrial LED High Bay Lighting appeared first on LEDStadium.

LED high bay lights can be divided into two kinds according to lighting functions: general illumination lights and partial illumination lights.

General Illumination Lights

General illumination lights are usually uniformly furnished on ceilings or on a working place’s side wall in order to illuminate the whole working area. It needs high-performance LED high bay light bulbs. General illumination light has high requirements for the distribution of spread. The distributions of direct and semi-direct illumination are widely employed, particularly the latter. Part of the up-going lights from semi-direct illumination can increase the brightness of ceilings so as to create more comfortable and brighter environment.

Partial Illumination Lights

A partial illumination light is a luminary that enhances a certain working area. Its function is to enhance and supplement the lighting based on general illumination, or also to act as temporary in some places where there’s not enough adequate lux levels, such as equipment overhauling and maintaining places. Most of the times the light distribution required is not strictly as strict on those spots. Partial illumination lights are often installed in places near working areas. They are portable lights, hanging lights, work desk lights, machine tool working lights and so forth. In some large and high-ceiling plants, LED flood lights are sometimes used as partial lighting.

Divided in accordance with the light source, LED high bay fixtures can be traditional light source high bay (like sodium lamp high bay and mercury lamp high bay) and LED high bay. Compared with traditional one, LED high bay fixtures have big advantages:

1. LED high bay light has high RA. RA>70.
2. LED high bay light has high light efficiency and more energy-saving. LED high bay light 100W can be a replacement of traditional high bay light 250W.
3. Traditional light source has many shortcomings on what comes to luminary temperature. The luminary temperature can reach 200-300℃. However, LED itself is cold light source, that doesn’t generate literally no excessive heat. So it’s safer and belongs to the category of cool sources.
4. LED high bay fixtures are currently facing unceasing innovation, with some of the more advanced passive heat sink designs. It makes the gross weight of 80W LED high bay light decrease to under 4 kilograms and can perfectly solve the heat dissipation problem of 80-300W LED high bay fixtures.

To meet the aesthetic requirements of different production operation and the requirements of light fixtures’ installation condition, LED high bay lights’ reflectors LED should be able to generate light distribution of all kinds of width. Reflectors whose surface painted with oil paint and glaze can get wide light distribution as well as reflectors that are made by aluminum, glass mirror, prismatic glass and so forth. They are suitable to be used in places with large area and in vertical working spaces.

LED high bay light has special requirements in structure design, outer case and reflector to work chronically and stably in dusty and moist environment. In dusty environment, we should use closed fixtures or sealed ones with upward luminous flux. In moist environments, we should focus on the outer frame’s leaking-proof and the reflector LED’s surface solution. Generally, open-style luminaries are often used in indoor places. LED high bay lights have many kinds of fixation methods. General illumination lights have the methods of ceiling mounted, implanting, hoisting and wall mounted. Removable partial lights are equipped with corresponding hooks, handles and spigots. Fixed-partial lights are usually firmly locked to working machinery with screws.

LED high bay fixture price, like outdoor LED industrial lighting price, is decided by three main things: Heat dissipation frame, LED chip and LED light source. Driver and power supply are also very important. LED high bay fixtures as well as LED outdoor lights are now in rapid development all over the world. They can replace all the old lights. It has become a worldwide trend. For example, our 150W LED high bay light is a 400 watt metal halide LED replacement, and 400w LED lights can directly replace a 1000 watt metal halide. As the LED technology is developing in a more and more prosperous way, LED high bay lights will definitely become a great innovation and the future of the lighting field.

The post LED Industrial Lighting Fixtures appeared first on LEDStadium.